Amstrad NC100: how to create an application?

Amstrad CPC and NC systems
EtchedPixels
Member
Posts: 20
Joined: Sat Aug 30, 2014 7:08 pm

Post by EtchedPixels »

Cool - I'll try and pull a copy next week and fix the opendir bug and check the rest.
stefano
Well known member
Posts: 2137
Joined: Mon Jul 16, 2007 7:39 pm

Post by stefano »

Cool ineed, and it's all your stuff ;)
EtchedPixels
Member
Posts: 20
Joined: Sat Aug 30, 2014 7:08 pm

Post by EtchedPixels »

(not forgotten about this, just a small 8bit OS project getting in the way somewhat)
stefano
Well known member
Posts: 2137
Joined: Mon Jul 16, 2007 7:39 pm

Post by stefano »

:) I had no doubts, your work was just too big to think you forgot about it. Take your time, so we can fix a recent nasty bug..
stefano
Well known member
Posts: 2137
Joined: Mon Jul 16, 2007 7:39 pm

Post by stefano »

I'd like to revive this thread, I had to cross compile the Russell's emulator on Windows to proceed with the experiments, and it was very long.
At this stage the graphics lib is quite complete in either ZCN, NC100 and NC200 mode, but fp crashes.
Hints on the registry to be preserved?
Are you still around?
EtchedPixels
Member
Posts: 20
Joined: Sat Aug 30, 2014 7:08 pm

Post by EtchedPixels »

I don't know what registers need to be preserved. It's not afaik documented anywhere.

Alan
stefano
Well known member
Posts: 2137
Joined: Mon Jul 16, 2007 7:39 pm

Post by stefano »

Well, the good news is that now we have a graphics library somewhat working (enough to run Othello and Dstar).
I'm testing the fcntl code and trying to understand how it works (does it write on RAM or CARD ?).
stefano
Well known member
Posts: 2137
Joined: Mon Jul 16, 2007 7:39 pm

Post by stefano »

Post Reply